No products in the cart.
Idee Regalo
-
Buoni Regalo
Offerta Gift Card 20€- 50€- 100€ Regala un buono -
Corsi Arduino-3D Printer
Arduino Micro:Bit Raspberry Robot Marttino
Nuovi prodotti
FOXX Range Extender Z-Wave Repeater
FOXX Range Extender Z-Wave Repeater
The FOXX Range Extender is a low-cost Z-Wave mesh network repeater and signal amplifier used to extend the range of communication between Z-Wave products in the same network.
The repeater supports Z-Wave explorer frames that allows for Network Wide Inclusion (NWI) and dynamic route discovery for other Z-Wave products that support explorer frames.
With an unobtrusive small form factor, the FOXX Range Extender will not block the lower AC outlet (when plugged into the top outlet).
The problem:
- You have invested in a Z-Wave connected home but find it hard to connect your devices to your Z-Wave hub because the range is too large.
- You want to install Z-Wave accessories such as a door/ windows sensor and MultiSensor in your garage where you have expensive belonging.
The impact:
- Time & inconvenience
- Discomfort and insecure
- Incur additional costs.
The features of the Z-Wave Repeater
- Removes connectivity black spots in your home.
- Enables you to connect your devices to your Z-Wave gateway.
Article Dimensions (WxHxL) | 46 x 46 x 58 mm |
Package Dimensions (WxHxL) | 76 x 57 x 68 mm |
Article net weight | 0.04 Kg |
Article gross weight | 0.06 Kg |
WEEE | |
CE |
The following manuals are available online