No products in the cart.
menu
Categories
- Arduino
- Raspberry Pi
- MICRO:BIT - EDUSTEM
-
Robotica Domotica
- Meccanica
- Servomotori
- Schede
- Accessori
-
Sensori
- Sensori vari
- Sensori ad ultrasuoni
- Sensori di posizione
- Sensori ad infrarossi
- Sensori di temperatura
- Sensori di umidità
- Sensori di luminosità
- Sensori di Gas ed Alcool
- Sensori di contatto
- Sensori di suono
- Sensori di colore
- Sensori Real Time Clock
- Set di sensori
- Sensori di vento
- Sensori magnetici
- Sensori biometrici
- Sensori Wearable
- Laser
- sensori/trasmettitori di pressione
- Optikascience
- Motori
- Batterie
- Carica batterie
- Attrezzatura
- Prototipazione elettronica
- Pannelli solari
- ACCESSORI DA LABORATORIO
- ATLAS SCIENTIFIC - ENVIROMENTAL ROBOTICS
- ACTUONIX
- Elettronica low cost
- NT sensor
- PLUX
- CNC - Plotter
-
3D Printer & Scanner
- Officine Robotics
- Scanner 3D
- SCUOLA - MEPA
- Robot Kit
- Taglio Laser
- IoT - Smart Home
- AI & Machine Learning
- blog
- Home
-
- 3D Printer & Scanner
- AI & Machine Learning
- Arduino
- CNC - Plotter
- Display
- IoT - Smart Home
- MICRO:BIT - EDUSTEM
- Officine Robotics
- R - Store
- Raspberry Pi
- Robot Kit
- Robotica Domotica
- Accessori
- ACCESSORI DA LABORATORIO
- ACTUONIX
- ATLAS SCIENTIFIC - ENVIROMENTAL ROBOTICS
- Attrezzatura
- Batterie
- Carica batterie
- Elettronica low cost
- Meccanica
- Motori
- NT sensor
- Pannelli solari
- PLUX
- Prototipazione elettronica
- Schede
- Sensori
- Laser
- Optikascience
- Sensori ad infrarossi
- Sensori ad ultrasuoni
- Sensori biometrici
- Sensori di colore
- Sensori di contatto
- Sensori di Gas ed Alcool
- Sensori di luminosità
- Sensori di posizione
- Sensori di suono
- Sensori di temperatura
- Sensori di umidità
- Sensori di vento
- Sensori magnetici
- Sensori Real Time Clock
- Sensori vari
- Sensori Wearable
- sensori/trasmettitori di pressione
- Set di sensori
- Servomotori
- SCUOLA - MEPA
- Taglio Laser
- 3D Printer & Scanner
Idee Regalo
-
Buoni Regalo
Offerta Gift Card 20€- 50€- 100€ Regala un buono -
Corsi Arduino-3D Printer
Arduino Micro:Bit Raspberry Robot Marttino
Nuovi prodotti
accessori-da-laboratorio
Oscilloscopio da...Portal Extention for STEPCRAFT Desktop Systems Series 1
Portal Extention for STEPCRAFT Desktop Systems Series 1
This kit includes 40 mm higher gantry uprights and is constructed especially for customers who want to extend the working height of the Z-axis, e. g. with using a vacuum table, bench vice or the STEPCRAFT HF Spindle.
The gantry uprights are twice as thick as the standard uprights in order to increase the stiffness of the gantry. Additionally, the uprights have a four track roller guidance which also supports the stability.
For the assembly all original parts of the machine will be used (e .g. track rollers, track roller holder), all additional parts are included in the kit.
Attention: When using the Proxxon / Dremel spindle or the 3D printhead the workpieces have to be supported by approx. 20 mm / 1 inch (e. g. with a thicker sacrificial plate). These attachments can no longer touch the machine table.
Scope of Delivery:
Gantry uprights left and right
Two adjustable track rollers with all small components necessary
Assembly manual