No products in the cart.
Idee Regalo
-
Buoni Regalo
Offerta Gift Card 20€- 50€- 100€ Regala un buono -
Corsi Arduino-3D Printer
Arduino Micro:Bit Raspberry Robot Marttino
Nuovi prodotti
4.2inch E-Ink raw display, three-color e paper black white red
Description
This is an E-Ink raw display, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
-
No backlight, keeps displaying last content for a long time even when power down
-
Ultra low power consumption, basically power is only required for refreshing
-
Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
Note:
To fastly get started with these raw displays, please consider the following driver board: e-Paper ESP8266 Driver Board
The driver board of 2.7inch E-Ink display HAT can also be used for testing the 4.2 inch E-Ink raw display, here's the Wiki for your reference.
Technical Details
Dimensions | 90.1mm x 77mm x 1.18mm |
Weight | G.W 30g N.W 15g |
Battery | Exclude |
Operating voltage | 3.3V |
Interface | 3-wire SPI, 4-wire SPI |
Outline dimension | 90.1mm × 77.0mm × 1.18mm |
Display size | 84.8mm × 63.6mm |
Dot pitch | 0.212 × 0.212 |
Resolution | 400 × 300 |
Display color | red, black, white |
Grey level | 2 |
Full refresh time | 15s |
Refresh power | 26.4mW(typ.) |
Standby power | <0.017mW |
Viewing angle | >170° |
Part List
4.2inch e-Paper (B) | 1 |