Categories

PrestaShop

Nuovi prodotti

Nuovi prodotti
Tutti i nuovi prodotti
Romeo - an Arduino Robot Control Board with Motor Driver
  • Romeo - an Arduino Robot Control Board with Motor Driver

DFRobot - Romeo-All in one

40,00 €

Romeo-All in one Controller (Arduino Compatible Atmega 328)

Quantità

Romeo family is an All-in-One Robot control board especially designed for robotics applications from DFRobot.  It benefits from the Arduino open source platform, it is supported by thousands of open source codes, and can easily be expanded with your Arduino shields. The integrated 2 way DC motor driver and wireless socket allows you to start your own robot project immediately without the need for an additional motor driver.  Not just has the motor driver, Romeo is also designed to have extra power for servos which need more current.

Romeo is also featured with DFRobot's standard 3 Pin-out designed and compatible with Gravity series sensors and actuators. Hundreds of sensors are now plug-play with Romeo.

This is the first member in Romeo family that is born in 2009. It is not only the very first Arduino Robot Controller, but also the first Arduino-derived board in the market. The current version of Romeo is based on Arduino Uno. It has built in 2x2A DC motor drivers and socket for bluetooth / APC220 Radio Communication Module communications.  The integrated io sensor pinout allows it connect hundreds of different  Gravity compatible sensors and modules. It has servo connector which is a plug&play. It is the ideal controller to build your own robot

Romeo All in One Robot Controller Board Review by Arnab Kumar Das

Il sistema integrato 2 vie CC driver del motore e la presa wireless consente di avviare il progetto immediatamente senza la necessità di un driver motore aggiuntivo o shield wirless.

UPDATE: Il v1.1 Romeo si comporta come standard di Arduino Uno, che significa che è possibile programmare direttamente dall'IDE Arduino.

Questa nuova versione ha cambiato i perni di posizione ICSP per rendere il Romeo compatibili con lo shield host USB e lo shield Ethernet.

Ciò significa che ora il Romeo potrebbe funzionare perfettamente con la maggior parte degli shield Arduino.


La v1.1 Romeo differenzia dalle schede precedenti in quanto non utilizza il chip driver FTDI USB-seriale.
Invece, presenta la Atmega8U2 programmato come convertitore
USB-seriale.

Tutti i perni del nuovo Romeo utilizzano i connettori maschio colorati (FIT0084-R, FIT0084-B, FIT0084-G).

Si usano comunemente: verde per I / O digitali, blu per I / O analogico, rosso per la tensione.

Specifiche
  • DC Supply:USB Powered or External 7V~12V DC
  • DC Output:5V /3.3V DC and External Power Output
  • Microcontroller: Atmega328
  • Bootloader: Arduino Uno
  • Compatible with the Arduino Uno pin mapping
  • 8 Channels 10-bit Analog I/O 
  • USB interface
  • 5 key inputs
  • Auto sensing/switching power input
  • ICSP header for direct program download
  • Serial Interface TTL Level
  • Support Male and Female Pin Header
  • Integrated sockets for APC220 RF Module and DF-Bluetooth Module
  • Three I2C Interface Pin Sets(two 90°pin headers)
  • Two way Motor Driver with 2A maximum current 
  • Gold plating pcb board
  • Size:90x80x14mm(3.54"x3.15"x0.55")
  • Weight:60 gram

DOCUMENTS

  • DC Supply:USB Powered or External 7V~12V DC
  • DC Output:5V /3.3V DC and External Power Output
  • Microcontroller: Atmega328
  • Bootloader: Arduino Uno
  • Compatible with the Arduino Uno pin mapping
  • 8 Channels 10-bit Analog I/O
  • USB interface
  • 5 key inputs
  • Auto sensing/switching power input
  • ICSP header for direct program download
  • Serial Interface TTL Level
  • Support Male and Female Pin Header
  • Integrated sockets for APC220 RF Module and DF-Bluetooth Module
  • Three I2C Interface Pin Sets(two 90°pin headers)
  • Two way Motor Driver with 2A maximum current
  • Gold plating pcb board
  • Size:90x80x14mm
  • Weight:60 gram
Contenuto della scatola
  • Romeo-All in one Controller (1 unit)
Documentazione
DF-DFR0004