Categories

Categorie
PrestaShop

Nuovi prodotti

Nuovi prodotti
Tutti i nuovi prodotti

CA-PET – 1,75ø – 750gr Spool

61,00 €
Tasse incluse
Quantità

CARBON FIBER PET 3D FILAMENT

With CA-PET you can reproduce objects and devices with superior characteristics in every printer.

100% printable in every printer, 100% satisfaction guarantee.

Best use in office and textile machines, mechanical parts like supports and other. You can aneel them.

No moisture inside CA-PET filaments, warrant of repeatibility.

ADDITIONAL INFORMATION ABOUT CA-PET

In general filaments made with CA PET (pet carbon) can be processed on conventional 3D printer using FDM / FFF technology.
CA PET is a pet carbon fiber reinforced developed for 3D printing and to obtain best results we recommend pre drying the filaments at 120° for 4-6 h. Increase drying time for spools up 1 kg.
Don’t leave the filament stopped inside the nozzle more than 20 min. If that down the temperature under 210°, better stop the thermal control.
Suggested print set merely represent a recommendation for general use . Every printer necessity a specific set , nozzle temp, bed temp, etc .
0.5 mm is the mininum diameter of the nozzle with carbon fibers reinforced.
Carbon fibers are abrasive, we suggest to use a nozzle in hardened or tempered metal, like Widia, or wear resistance internal surface, like ceramics or other.
NO tefloned surface!

https://treedfilaments.com/wp-content/uploads/2019/04/CA-PET.pdf

TRE-CAPET