Nuovi prodotti

Nuovi prodotti
Tutti i nuovi prodotti
  • Nuovo

Arducam 64MP Camera and CSI-to-HDMI Adapter Set

79,00 €


A high-res 64MP autofocus camera paired with a CSI-to-HDMI cable extension solution that offers up to a 10-meter connection for most Raspberry Pis.

Great for projects/applications where you need to put a camera module far away from an RPi.

The CSI-to-HDMI kit works out of the box, no extra software/configuration is needed, it is also compatible with the official camera V1/V2/HQ and Arducam OV5647/IMX219/IMX477 series.

We also have another kit if you want longer connections over CSI 2.


Specification - 64MP-AF CAMERA

arducam pi hawk eye specification f


Specification – CSI-TO-HDMI KIT

  • Support NVIDIA Jetson and Raspberry Pi 4B, Pi 3B+, Pi 3B, Pi 2, Model A/B/B+, Pi Zero
  • Reserved microphone and headphone jack for audio or GPIO signals
  • Three additional solder pads are available (same signals as a headphone jack)
  • Size: 27.63 x 25.00mm




Packing List

  • 1 x 64MP-AF Camera
  • 2pcs HDMI to CSI Adapter Board with 60mm 15pin Ribbon Cable



*To use the camera on Pi Zero and 2 W, you need this.
**Make sure to use high-quality HDMI v2.1 cables.



  • Can I use the adapter kit for monitors?
       - No, the kit is designed only to extend the cable length of MIPI CSI-2 Pi cameras, it will not work with other platforms/interfaces.
  • What's the maximum allowed distance?
        - For a stable connection, please keep the length no more than 10 meters.
  • Is it compatible with other 3rd party camera modules?
        - No.
  • Can I use it with your quad-camera and stereoscopic camera series?
        - Yes.