High precision engraving and cutting Laser Falcon takes into account both engraving and cutting performance by using poly-lens spot compressed laser technology, achieving both precision up to 0.1mm. The spot size was compressed to 0.120.06mm from 0.320.14mm. In this case, the engraving accuracy and engraving speed are increased by more than 6 times. The works are finer, with less degrees, flanges.

Precise engraving and cutting

Laser Falcon takes into account both engraving and cutting performance by using poly-lens spot compressed laser technology, achieving both precision up to 0.1mm. The spot size was compressed to 0.12*0.06mm from 0.32*0.14mm. In this case, the engraving accuracy and engraving speed are increased by more than 6 times. The works are finer, with less degrees, flanges.

It also has outstanding cutting ability. It can cut 4-5mm basswood veneer, twice as thick as the original 2mm.

Easy to use - Control with one button

The CR-Laser Falcon eliminates the hassle of many control buttons.The glowing button can not only control engraving or cutting, but also can show us the working state of the machine, which allows us to identify the working state.

Fast and accurate starting point

Continuous blue light from the laser head will preview the engraving or cutting area. It is convenient for you to determine if the position is your desired engraving area. If not, you can make an adjustment. For batch engraving, you can use the additional grid plate for the same work area confirmation.