Categories

Categorie
PrestaShop

Nuovi prodotti

Nuovi prodotti
Tutti i nuovi prodotti
  • Nuovo

Polymaker PolyTerra PLA + - Blue 1Kg

23,00 €
Quantità

PLA+

PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.

Recommended Settings

  • Nozzle temperature: 190 – 220 ℃
  • Build plate temperature: 30 - 60 ˚C
  • Printing speed: 30 - 70 mm/s
  • Build Surface Material: BuildTak®, Glass, Blue Tape
  • Cooling Fan: ON

10195_Filament_Polymaker__001.jpg

Basic Data
Material PLA
Diameter 1,75 mm
Weight 1,00 kg
Length 335 m
Color White
 
Printing Parameter
Recommended Min Print Temp 190 ºC
Recommended Max Print Temp 220 ºC
Recommended Min Bed Temp 30 ºC
Recommended Max Bed Temp 60 ºC
Recommended Min Print Speed 30 mm/s
Recommended Max Print Speed 70 mm/s
Recommended Retraction Min 30 mm
Recommended Retraction Max 60 mm
General  
Specific Gravity 1,24 g/cm3   ISO 1183
Temperature  
Vicat softening temp 62 °C   ISO 306
Heat Deflection Temp 56,2 °C   ISO 75
Flexural  
Flexural Strength 49,5 MPa   ISO 178
Flexural Modulus 2232 MPa   ISO 178

PN-28602