arducam
Arducam OV7251 0.3MP...Arducam OV7251 0.3MP Global Shutter Camera Evaluation Kit...
219,00 €
Prezzo
No products in the cart.
Assistenza
+39-06-45425958
Spedizione gratis
per ordini oltre €150
Nuovi prodotti
home
Polymaker PolyLite...Versione A per una finitura perfetta
Versione B per una...
29,90 €
Prezzo
arducam
Arducam Camera MIPI...Modulo camera Arducam MIPI CSI-2 con risoluzione 4K HDR e...
129,00 €
Prezzo
arducam
Arducam UVC AI Camera...
Modulo camera UVC USB3 con sensore Sony IMX500 da 12.3MP...
229,00 €
Prezzo
arducam
Arducam IMX519 16MP...Camera Arducam IMX519 da 16MP con autofocus rapido e...
28,00 €
Prezzo
Polymaker PolyTerra PLA + - Orange 1Kg
23,00 €
PLA+
PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
Recommended Settings
- Nozzle temperature: 190 – 220 ℃
- Build plate temperature: 30 - 60 ˚C
- Printing speed: 30 - 70 mm/s
- Build Surface Material: BuildTak®, Glass, Blue Tape
- Cooling Fan: ON
| Basic Data | |
| Material | PLA |
| Diameter | 1,75 mm |
| Weight | 1,00 kg |
| Length | 335 m |
| Color | White |
| Printing Parameter | |
| Recommended Min Print Temp | 190 ºC |
| Recommended Max Print Temp | 220 ºC |
| Recommended Min Bed Temp | 30 ºC |
| Recommended Max Bed Temp | 60 ºC |
| Recommended Min Print Speed | 30 mm/s |
| Recommended Max Print Speed | 70 mm/s |
| Recommended Retraction Min | 30 mm |
| Recommended Retraction Max | 60 mm |
| General | |
| Specific Gravity | 1,24 g/cm3 ISO 1183 |
| Temperature | |
| Vicat softening temp | 62 °C ISO 306 |
| Heat Deflection Temp | 56,2 °C ISO 75 |
| Flexural | |
| Flexural Strength | 49,5 MPa ISO 178 |
| Flexural Modulus | 2232 MPa ISO 178 |
PN-28602
Riferimenti Specifici