Supports dual-use – RX and TX beacon. It can transmit on its native ultrasonic frequency (25kHz) and it can receive on any ultrasonic frequency via an embedded RX sensor – like Industrial-RX or Mini-RX does. Effectively, the Industrial Super-Beacons beacons combines inside an Industrial-TX and Industrial-RX. Additionally, the beacon supports both IA and NIA architectures. Thus, it is called Industrial Super-Beacon
Very solid and up to IP67 level protection
Special IP67-protected 25-kHz transducers
External antenna with SMA connector for extended radio range
Currently, supports license-free 915MHz ISM band (US) and license-free SRD band 868MHz (EU). Future 433MHz HW variants may come in some months, but no firm schedule yet. You can place orders for 433MHz. When sufficient amount is collected, we will produce the 433MHz version as well
Two IP67 external connectors:
Power:
+12V power supply (works from +6V till +15V) – the same as with Industrial-TX and Industrial-RX
Reset pin
DFU pin
GND
Interfaces :
RS485
UART 3.3V
USB (TX+RX)
GND
Corresponding IP67 connectors (male part) included
No battery inside by default – external power bank or external power supply (+12V). Optional variant with internal battery is available on request
Extended working temperature range: -40C…+50C (provided by design)
Embedded reset switch and DFU switch – magnetic control 0r external pins on IP67
Can work with Industrial-RX beacon and Mini-RX beacon and Beacon HW v4.9 with 25kHz ultrasonic sensors. In all cases, the radio bands must match
Ultrasonic range – up to 25m with Industrial-TX or Industrial-RX or Mini-RX
Radio range to modem – up to a few hundred meters in open space with full-size antennas bendable antennas