

No products in the cart.
Zortrax Inventure
Together with Zortrax Inventure, we have launched an original system of printing two materials at once, with two, separate nozzles.
The materials change automatically – between Z-PETG or Z-PLA and Z-SUPPORT.
Zortrax Inventure is equipped with a quick and easy-to-use Dissolvable Support System.
DSS is a fluid-flow station that dissolves the support.
You can leave your print in a water for a few hours and find it without any remains.
This process is completely hands-free and also time-saving.
Printing intricate objects and moving mechanisms with tight tolerance has never been easier.
No matter whether the moveable part is being placed inside or outside the model.
The built-in encoders and automatic change of materials only ensures it.
While creating our new 3D printer, we have used the newest technology – called Layer Plastic Deposition Plus.
LPD Plus, combined with the Dissolvable Support System brings the most advanced technological solutions to a broader audience.
Smartly and professionally.
Together with your Zortrax Inventure, you will get a system of products that not only include the key to Z-SUITE and Starter Kit.
The set also includes a cartridge with Z-PETG, a cartridge with Z-SUPPORT, DSS Station and 4 build plates.
Specifiche Tecniche
Dimensioni
Tecnologia LPD Plus – avanzata tecnologia con sistema DSS
Volume utile di stampa: 140 x 140 x 140 mm (5.5 x 5.5 x 5.5 in)
Risoluzione: 90-400 microns
Contenitori filamenti: Cartridge
Spessore di parete: – Minimo 400 microns – Ottimalel: 800 microns
Diametro filamento: 1.75 mm
Diametro ugello: 0.3 mm
Precisione di posizionamento singolo asse: 1.5 microns
Precisione di posizionamento (X/Y): 1.5 microns
Z-axis singolo step: 1.25 microns
Temperature
Temperatura estrusore massima: 380° C (716° F)
Camera riscaldata: SI
Temperatura camera massima: 90° C
Temperatura ambiante operativa: 15-35° C (60°-95° F)
Temperatura di stoccaggio:0°-35° C (32°-95° F)
3D Printer
Supporto: Solubile – differente dal materiale di stampa
Filtro HEPA: SI
Sensore consumo materiale: SI
Chip con informazioni materiale di stampa (tipo,colore, consumo): SI
Estrusore: Singolo con doppio ugello
Conenttività: SD Card (inclusa)
Materiali disponibili: Z-ULTRAT Plus, Z-SUPPORT
Elettrico
AC Input: 110/240V ~ 2 A 50/60 Hz
Potenza richiesta: 24 V DC @ 11 A
Potenza consumata: 160W
Software
Softwar: Z-SUITE
Tipi Files: .stl .obj .dxf
Supporta: Mac OS X / Windows XP and newer versions