Categories

Categorie
PrestaShop

Nuovi prodotti

Nuovi prodotti
Tutti i nuovi prodotti

10Pcs of 3D Printer Nema 17 Stepper Motor 59Ncm(84oz.in) 2A 17HS

121,00 €

10Pcs of 3D Printer Nema 17 Stepper Motor 59Ncm(84oz.in) 2A 17HS19-2004S1

Quantità

Description

This is high torque Nema 17 stepper motor with 1.8° step angle (200 steps/revolution). Each phase draws 2A, allowing for a holding torque of 59Ncm(83.6oz.in). It's good ideal for 3D printers, as well as CNC and robotics applications. The motors are supplied with a 1 metre long power cable with a 4-pin 0.1" pitch (2.54mm) Harwin female connector already fitted.

Electrical Specification


Manufacturer Part Number 17HS19-2004S1
Motor Type Bipolar Stepper
Step Angle 1.8°
Holding Torque 59Ncm(83.6oz.in)
Rated Current/phase 2.0A
Phase Resistance 1.4ohms
Recommended Voltage 12-24V
Inductance 3.0mH±20%(1KHz)

Physical Specification


Frame Size 42 x 42mm
Body Length 48mm
Shaft Diameter ?5mm
Shaft Length 24mm
Double D-cut Length 15mm
Number of Leads 4
Lead Length 1000mm
Weight 390g

Connection


Wire Color Black Green Red Blue
Board Connector A C B D

warning Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

Related Products

  • Stepper Motor Driver
    For each stepper motor, it should work with a stepper motor driver, below is a matched stepper motor driver:
    • ST-6128: Economical stepper driver, Output current 0.25 - 2.0A, Input voltage 9V - 32VDC, Max. step resolution 1/128.
    • ST-7128: Economical stepper driver, Output current 0.60 - 3.0A, Input voltage 10V - 32VDC, Max. step resolution 1/128.
    • DM422C: Digital stepper driver, Output current 0.2 - 2.2A, Input voltage 20-40VDC, Max. step resolutions 1/32, ideal solution for applications that require low-speed smoothness.
  • Stepper Motor Power Supply
    Recommended Driving Voltage is 12 - 24VDC.
  • Motor Mounting Bracket
    This motor mounting bracket can match any standard Nema 16/Nema 17 stepper motor and geared stepper motor.
    Nema 17 Motor Mounting Bracket

Custom Options

  • Connectors: Molex, Harwin, Tyco/AMP, JST etc.
  • Lead wires & cables: Special lengths, Protective hose
  • Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow

Resources

SO-0394