Categories

PrestaShop

Nuovi prodotti

Nuovi prodotti
Tutti i nuovi prodotti

Stepper Motor with 38cm Lead Screw: Bipolar, 200 Steps/Rev, 42×3

66,80 €
Tasse incluse

Stepper Motor with 38cm Lead Screw: Bipolar, 200 Steps/Rev, 42×3

Quantità

This NEMA 17-size hybrid bipolar stepping motor has an integrated 38 cm (15?) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7

  • Size: 42.3 mm square × 38 mm, not including the shaft (NEMA 17)
  • Leadscrew: Tr 8 × 8(P2)
  • Steps per revolution: 200
  • Linear step size: 40 µm (1.6 mil) per full step
  • Current rating: 1.68 A per coil
  • Voltage rating: 2.8 V
  • Resistance: 1.65 ? per coil
  • Holding torque: 3.7 kg-cm (51 oz-in)
  • Inductance: 3.2 mH per coil
  • Lead length: 16 cm (6.5?)
  • Output shaft supported by two ball bearings
PO-2690