Categories

PrestaShop

Nuovi prodotti

Nuovi prodotti
Tutti i nuovi prodotti

SODAQ ONE

99,00 €

SODAQ ONE

Quantità

This board is based on our successful Autonomo, a proven 32 bit Arduino compatible platform. It is equipped with a solar charge controller and runs on a LiPo or a permanent battery. We changed the GPS module to the Ublox Eva 8M, which adds 4dB extra sensitivity! It's not only miniature but with it's assisted GPS feature it can get a fix within seconds. We've now added an extremely low power Accelerometer. This gives the board a nifty feature where it can stay in (deep) sleep mode until it moves. An essential feature for developing low power devices.

Let's imagine you want to develop a bicycle tracker using the SODAQ ONE. You would like to track the position of the bike, but only when it has moved. This is possible if you keep the device in deep sleep until it detects motion. If the motion continues for a while, the bicycle may have changed position so only then the GPS will switch on to get a new reading and send this location over the LoRa network. Efficient right? This system will allow you make most efficient use of your battery capacity by only using the GPS when really needed, essentially increasing the battery life of your system.

The board is so small (40x25 mm) you can fit it inside almost anything (Seriously, look at the picture). To ease the development we have fitted two rows of headers so you can use it on a breadboard. Why? Well, it has 14 free I/O lines that you can use for your own purpose. Whether you want to build a weather station, control street lights or get a signal when you have received (snail) mail. It's all possible with the SODAQ ONE.

Here's an overview of the features:

Microcontroller ATSAMD21G18, 32-Bit ARM Cortex M0+
Compatibility

Arduino M0 Compatible

Size

40 x 25 mm

Operating Voltage

3.3V

I/O Pins

14, All can be used for digital and 12 log with PWM, UART, SPI and TWI (I2C)

Analog Output Pin

10-bit DAC

External Interrupts

Available on all pins

DC Current per I/O pin

7 mA

Flash Memory

256 KB

SRAM

32KB

EEPROM

Up to 16KB by emulation

Clock Speed

48 MHz

Debug

Serial Wire Interface

Power

5V USB power and/or 3.7 LiPo battery

Charging

Solar charge controller, up to 500mA charge current

LED

RGB LED

LoRa Microchip

RN2483 Module

GPS

uBlox EVA 8M

Accelerometer

LIS3DE

USB

MicroUSB Port

SQ-one