LX-224 Serial Bus Servo 20kg
20 kg·cm (236 oz·in) @6.8V
MIn Working Current
20cm(7.9inch) in length
1* bus servo
1* 20cm servo wire
1* primary servo horn(4mm/0.157in thick)
1* assistant servo horn(2mm/0.078in thick)
15* M2*5 self-tapping screws
Use serial bus servo connector to connect the servo one by one, beautify the looking and facilitate the wiring.
Use high-precision potentiometer to feedback the angle position.
Equipped with position/temperature/voltage feedback, protect the servo from burning.
Support two working mode: Servo mode ( rotation range: 0-240) and Gear motor mode ( rotation range: 0-360).
Use metal gear to extend the service time.
20KG large torque.Dual ball bearing: one is the driving ball bearing, the other is the assistant ball bearing.