Categories

PrestaShop

Nuovi prodotti

Nuovi prodotti
Tutti i nuovi prodotti

K30-FR Modulo sensore di CO2 con risposta rapida con uscite analogiche

126,50 €

K30-FR Modulo sensore di CO2 con risposta rapida; uscite analogiche e_x000D_ interfacce digitali

Quantità

CO2 Engine® K30 FR

CO2 Engine K30 FR is a high performance CO2 sensor module optimized for fast response
time. The sample cell is well protected by a particle filter and is designed for fast diffusion
 without any need for external pump. In addition, there is a tube inlet to be able to feed on-line test gas through the sensor.

KEY BENEFITS

-Fast response time

-Individually calibrated

-Maintenance-free

-Long term stability

Product sheet

CO2 Engine K30 FR

APPLICATION

CO2 Engine K30 FR is designed for simple integration into products that require a fast update rate of CO2 measurements.

The sensor can be used in a wide range of applications where fast changes need to be detected,

such as gas leakage in food and pharmaceutics packaging industry.

Other uses are human occupancy detection and leakage detection in industry

SPECIFICATION

Standard Specification

Operating Principle Non-dispersive infrared (NDIR)
Measured gas Carbon dioxide (CO2)
Measurement range CO2 0 to 5000 ppm
Accuracy ±30 ppm ±3% of reading
Dimensions 57 mm x 51 mm x 14 mm
Maintenance No maintenance required*
Life Expectancy > 3 years
Operation temperature range 0 to 50 °C
Operation humidity range 0 to 95% RH (non-condensing)
Power supply 4.5 to 14.0 V DC
Power Consumtion 70 mA (average)
Response timeT90 2 seconds @ 0,5 l/min tube gas flow
Warm-up time 1 min
Communication Uart ( Modbus)
Outputs
OUT 1 linear output 0 to 10 V DC = 0 to 5000 ppm
OUT 2 linear output 0 to 5 V DC = 0 to 5000 ppm
OUT 3 digital output 700/800 ppm
OUT 4 digital output 900/1000 ppm
R3D-K30-FR