No products in the cart.
Idee Regalo
-
Buoni Regalo
Offerta Gift Card 20€- 50€- 100€ Regala un buono -
Corsi Arduino-3D Printer
Arduino Micro:Bit Raspberry Robot Marttino
Nuovi prodotti
accessori-da-laboratorio
Oscilloscopio da...Driver Breakout for micro:bit, drives motors and servos
This driver board gives your micro:bit the ability to drive two channel DC motors and three channel servos. It's an ideal choice for you to DIY mobile robots.
Description
This driver board gives your micro:bit the ability to drive two channel DC motors and three channel servos. It's an ideal choice for you to DIY mobile robots.
Features
-
micro:bit edge connector, directly pluggable
-
2x DC motor interfaces, 3x servo interfaces
-
Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal
-
Onboard multi connector options for DC motors in different specifications, onboard standard servo headers
-
Comes with development resources and manual (micro:bit graphical examples)
Micor:bit has variety of programming methods like mbed, micropython, typescript and other programming methods, as well as code online websites which are abundant.
The official recommendation are two programming methods: typescript and micropython. Typescript is the graphical programming language. Its website is that:https://makecode.microbit.org/#
Technical Details
Dimensions | 65mm x 36mm x 15mm |
Weight | G.W 219g N.W 200g |
Battery | Exclude |
Power supply | 6V~12V (VIN terminal) |
Servo voltage | 5V |
Logic voltage | 3.3V |
Driver | TB6612FNG |
Mounting hole size | 3.0mm |
Pinouts | |
Vcc | Power (6~12V) |
GND | Ground |
A1 | positive pole of motor A |
A2 | negative pole of motor A |
B1 | positive pole of motor B |
B2 | negative pole of motor B |
P0 | control pin P0 of steering gear |
P1 | control pin P1 of steering gear |
P2 | control pin P2 of steering gear |
Part List
Motor Driver for micro:bit | 1 |