Categories

PrestaShop

Nuovi prodotti

Nuovi prodotti
Tutti i nuovi prodotti
  • Nuovo

EZO-PMP™ Advanced Kit

155,74 €

*SPECIFICARE IL COLORE*

RED - GREEN - BLUE - ORANGE - YELLOW - WHITE

Quantità

The EZO™ Advanced pump kit comes with everything found in our original EZO pump kit and more!

Having the pump already mounted into an enclosure saves a lot of time.
The power connector and data cable with breakout board make integration onto your device FAST!

*This device comes defaulted to I2C mode*
*You can switch it back to UART mode if desired*

Enclosure:
Size Metric: L = 145mm x W = 90.5mm x H = 80mm
Inch: L = 5.7″ x W = 3.5″ x H = 3.1″
Enclosure protection IP-64
Enclosure material Body: Polycarbonate plastic
Screws: Stainless steel
Pump: *This pump is set to I2C mode by defualt*
*It can be change to UART mode.*
*See data sheet for instructions*
Flow rate 0.5ml to 105ml/mins
Accuracy +/- 1%
Modes of operation Continuous dispensing
Volume dispensing
Dose over time mode
Constant flow rate
Dispense at startup
Connector 5 lead data cable
Calibration Single point
Supplied tubing 15.24 cm
Tubing size Any 5mm O.D. tubing
Data protocol UART & I2C
Default I2C address 103 (0x67)
Operating voltage 3.3V – 5V (logic)
12V – 24V (motor)
Pump head 2 meters
Data format ASCII
Food safe Yes

AS-EZO-ADV-PMP